Your cart contains  0 items
Search:
Categories
Quick Order
Last Order
Diamed # Qty.
Need more items?
  

Amerex Shaking Incubator Series, 120V

Amerex Shaking Incubator Series, 120V
Amerex Shaking Incubator Series
Amerex 757 Series Shaking Incubators

Features

The SteadyShakeTM AMESK757 and AMESK757L are economical and compact bench top incubator shakers. The AMESK757 occupies only 18" W x 19" D of space, and the AMESK757L is slightly larger (20.5 x 25.5 Inches, W x D) for increased flask capacity. The AMESK757 can accommodate four 2-liter Erlenmeyer or two 2.8-liter Fernbach flasks, and the AMESK757L five and four of these, respectively.

The lid has a large viewing window and a microprocessor temperature controller maintains precise temperature control from 3° C above ambient to 70° C. A quiet fan ensures air and temperature uniformity throughout the chamber. The brushless, maintenance-free drive motor generates speeds from 40 to 400 RPM (60 Hz frequency) which is displayed on a digital readout.

A triple-eccentric drive with counter-balancing weights provides smooth and quiet shaking, and eliminates the inconvenience of making the balancing adjustments as the load increases. The timer switch affords a choice of flipping between a continuous run and a timed run up to 99 hours and 59 minutes. An independent over-temperature thermostat, conveniently located on the control panel, prevents over-heating. For even longer runs, each timed run can be repeated up to 999 times.

Multi-step speed programming is available. A program can consdist of up to 9 steps and for each step you can change the time, RPM and the direction of rotation. For example, shake for 60 minutes at 300 RPM in a clockwise direction, then for 120 minutes at 250 RPM for 90 in a ocunter clockwise direction followed by 200 RPM for 120 minutes in the opposite direction and so on. For applications such as the miing of immiscible liquids or in extraction, the direction of rotation can change every 1 minute for optimum effect. To prevent over-heating, the controller shuts off the heater if the chamber temperature exceeds the sset temperature by a pre-determined number of degrees. In case of a power failure, shaking automatically resumes when power is restored.

Accessories include: universal platform, clamps, spring rack for tubes in an angled or vertical position, tubes plus flasks without the need for  clamps, tube racks and universal rack holders, and a holder for micro and deep-well plates.

Available Models

Product Code Description
AMESK-757 Amerex 757 Steady Shake Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK-757L Amerex 757L Steady Shake Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)

Included with Purchase
  • 1 x SteadyShakeTM Benchtop Shaking Incubator Unit
  • 1 x Power Cord & Instruction Manual

Accessories

Optional accessories include platforms, clamps, full and custom spring racks, microtiter plate holders and additional shelves. Platform holes are drilled to accommodate the different clamps purchased.

Spring racks are designed for holding tubes in a horizontal, angled, or upright position. They can also be used to hold flasks up to 1-liter without clamps. The racks consist of a 2-tiered grid of stainless steel springs. The distance between the two grids is adjustable so as to accommodate tubes and flasks of different heights. The spring racks are fastened onto the platform by four screws.

Custom spring racks allow for a combination of large flasks, microtiter plates and tubes on a given platform.

Product Code Description
AMESK757P Universal Platform for AMESK757 SteadyShakeTM Shaking Incubator, 15.8 x 11.8 Inches (W x D), Each
AMESK757LP Universal Platform for AMESK757 SteadyShakeTM Shaking Incubator, 18.1 x 18.1 Inches (W x D), Each
AMESK757-SR Spring Rack Platform for AMESK757 SteadyShakeTM Shaking Incubator, 80 Tube Capacity, Each
AMESK757L-SR Spring Rack Platform for AMESK757 SteadyShakeTM Shaking Incubator, 132 Tube Capacity, Each
AMESK757L-SR2 Spring Rack Platform for AMESK757 SteadyShakeTM Shaking Incubator, 90 Tube Capacity, Each
AMESK757L-CSR-30 Custom Spring Rack Platform for AMESK757L SteadyShakeTM Shaking Incubator, 8.5 x 17.5 Inches, (W x D), 30 Tube Capacity, Each
AMESKA-DWPH Plate Holder Accessory for Universal Platform, Holds up to 8 Plates or 4 Deep Well Plates, Each
AMESKA-TRH-S Tube Rack Accessory for Universal Platform, Holds 1 x Tube Rack (8 3/8 x 4 5/16 Inches, W x D), Each
AMESKA-TRH-T Tube Rack Accessory for Universal Platform, Holds 2 x Tube Racks (8 3/8 x 4 5/16 Inches, W x D), Each
AMESKA-TR-13-72 Tube Rack Accessory for Universal Platform, Holds 72 x (10 - 13 mm) Tubes, Each
AMESKA-TR-16-50 Tube Rack Accessory for Universal Platform, Holds 50 x 15 ml Conical Tubes (13 - 16 mm), Each
AMESKA-TR-20-32 Tube Rack Accessory for Universal Platform, Holds 32 x 15 ml Conical Tubes (16 - 20 mm), Each
AMESKA-TR-25-18 Tube Rack Accessory for Universal Platform, Holds 18 x (21 - 25 mm) Tubes, Each
AMESKA-TR-30-15 Tube Rack Accessory for Universal Platform, Holds 15 x 50 ml Conical Tubes (27 - 30 mm), Each
AMESKA-CC10 10 ml Flask Clamp for Universal Platform, Each
AMESKA-CC25 25 ml Flask Clamp for Universal Platform, Each
AMESKA-CC50 50 ml Flask Clamp for Universal Platform, Each
AMESKA-CC125 125 ml Flask Clamp for Universal Platform, Each
AMESKA-CC250 250 ml Flask Clamp for Universal Platform, Each
AMESKA-CC500 500 ml Flask Clamp for Universal Platform, Each
AMESKA-CC1000 1000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC2000 2000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC2800 2.8 L Fernbach Flask Clamp for Universal Platform, Each
AMESKA-CC4000 4000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC6000 6000 ml Flask Clamp for Universal Platform, Each
AMESKA-SM Sticky Mat for Universal Platform, 18 x 18 Inches (W x D), Each
AMESKA-ROD Rods for 2-tier Platform, set of 4, Includes Mounting Hardware, 1 Kit required per platform, 1 Kit per pack


Specifications

Flask Size (ml)
Universal Platform Maximum Capacity
25 50 125 250 500 1000 2000 2800
Steady Shake AMESK757 48 35 20 12 8 6 3 2
Steady Shake AMESK757L 81 64 36 25 16 9 5 4

  Steady Shake AMESK757 Steady Shake AMESK757L
Temperature Range About 4° C above ambient to 70° C
Temperature Control Auto-tune PID microprocessor temperature controller
Temperature Display Digital to 0.1° C
Accuracy/Uniformity ± 0.1° C/± 0.5° C at 37° C
Safety Devices   1) Motor stops when door is opened,
2) over-temp thermostat prevents over-heating
Drive   Dynamically balanced triple-eccentric drive
Motor   Maintenance-free brushless motor cooled by a fan
Speed Range   40 to 400 rpm (60 Hz frequency) with standard 1" (25 mm) orbit
Speed Display   Digital Readout
Timer   Programmable up to 99 hours and 59 minutes
Chamber Material   Coated steel
Platform Dimensions (W x D)  15.8 x 11.8 Inches, 400 x 300 mm 18.1 x 18.1 Inches, 460 x 460 mm
Chamber Dimensions (W x D x H)  17.7 x 15.0 x 13.0 Inches, 450 x 380 x 330 mm 20.1 x 21.2 x 13.0 Inches, 510 x 540 x 330 mm
Overall Dimensions (W x D x H)  18.1 x 19.3 x 19.7 Inches, 460 x 490 x 500 mm 20.5 x 25.5 x 19.7 inches, 521 x 648 x 500 mm
Power Source  120 V, 50/60 Hz, single phase, 4 A (220 V available) 120 V, 50/60 Hz, single phase, 4 A (220 V available)
Shipping Weight  84 lb 105 lb
Warranty   2 Year Manufacturer's Limited Warranty

Amerex Gyromax Incubator Shaker Series

Features

The AMESK727 (height, 30.3 inches) AMESK737 (height, 33.5 Inches) and AMESK757 (height 32.6 inches) can fit on or under most workbenches. All these models can be stacked to save valuable laboratory space.

The AMESK727 is compact and occupies only 20 x 27 inch (W x D) of space. With a height of 30.3 inches, it can fit on or under a workbench. You can also stack two AMESK727 units. The chamber holds a 15 x 15 inch (W x D) platform and accommodates flasks up to 4 liters.

Using the shelf (one is included) and the shaking platform, you can incubate Petri dishes and shake flasks at the same time. YOu can adjust the shelf height and use more than one shelf in the chamber.

The AMESK767/767R and AMESK777/777R are chest type incubator shakers that are mounted on casters. They feature a front glass window that enables the user to look into the chamber when away from the shaker.

The AMESK767/767R accommodates a 30 x 18 inch (W x D) platform while the AMESK777/777R with a 38 x 24 inch (W x D) platform, offers the most capacity among all chest type incubator shakers in the marketplace. For example, they can accommodate 24 x 1 L, 15 x 2 L, or 6 x 6 L flasks. In the refrigerated models AMESK767R and AMESK777R, a chamber temperature as low as 4° C can be maintained.

Available Models

Product Code Description
AMESK727 Amerex 727 GyromaxTM Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK737 Amerex 737 GyromaxTM Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK737R Amerex 737 GyromaxTM Refrigerated Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK747 Amerex 747 GyromaxTM Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK747R Amerex 747 GyromaxTM Refrigerated Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK767 Amerex 767 GyromaxTM Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK767R Amerex 767 GyromaxTM Refrigerated Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK777 Amerex 777 GyromaxTM Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)
AMESK777R Amerex 777 GyromaxTM Refrigerated Bench Top Shaking Incubator, Each (Platform and Clamps Sold Separately)

Included with Purchase
  • 1 x GyromaxTM Benchtop Shaking Incubator Unit
  • 1 x Power Cord & Instruction Manual

Accessories

Optional accessories include platforms, clamps, full and custom spring racks, microtiter plate holders and additional shelves. Platform holes are drilled to accommodate the different clamps purchased.

Spring racks are designed for holding tubes in a horizontal, angled, or upright position. They can also be used to hold flasks up to 1-liter without clamps. The racks consist of a 2-tiered grid of stainless steel springs. The distance between the two grids is adjustable so as to accommodate tubes and flasks of different heights. The spring racks are fastened onto the platform by four screws.

Custom spring racks allow for a combination of large flasks, microtiter plates and tubes on a given platform.

Product Code Description
AMESK727P Universal Platform for AMESK727 GyromaxTM Shaking Incubator, 15 x 15 Inches (W x D), Each
AMESK737P Universal Platform for AMESK737 GyromaxTM Shaking Incubator Series, 20.5 x 17.8 Inches (W x D), Each
AMESK747P Universal Platform for AMESK747 GyromaxTM Shaking Incubator, 26 x 21 Inches (W x D), Each
AMESK767P Universal Platform for AMESK767 GyromaxTM Shaking Incubator, 30 x 18 Inches (W x D), Each
AMESK777P Universal Platform for AMESK777 GyromaxTM Shaking Incubator, 38 x 24 Inches (W x D), Each
AMESK727-SR Spring Rack for AMESK727 GyromaxTM Shaking Incubator, 56 Tube Capacity, Each
AMESK737-SR Spring Rack for AMESK737 GyromaxTM Shaking Incubator, 110 Tube Capacity, Each
AMESK747-SR Spring Rack for AMESK747 GyromaxTM Shaking Incubator, 168 Tube Capacity, Each
AMESK767-SR Spring Rack for AMESK767 GyromaxTM Shaking Incubator, 160 Tube Capacity, Each
AMESK777-SR Spring Rack for AMESK777 GyromaxTM Shaking Incubator, Each
AMESK727-CSR-24 Custom Spring Rack Platform for AMESK727 GyromaxTM Shaking Incubator, 7.3 x 14 Inches, (W x D), 24 Tube Capacity, Each
AMESK737-CSR-30 Custom Spring Rack Platform for AMESK737 GyromaxTM Shaking Incubator, 8.5 x 17.5 Inches, (W x D), 30 Tube Capacity, Each
AMESK737-CSR-40 Custom Spring Rack Platform for AMESK737 GyromaxTM Shaking Incubator, 9 x 17.5 Inches, (W x D), 40 Tube Capacity, Each
AMESK747-CSR-48 Custom Spring Rack Platform for AMESK747 GyromaxTM Shaking Incubator, 9 x 21 Inches, (W x D), 48 Tube Capacity, Each
AMESK767-CSR-40 Custom Spring Rack Platform for AMESK767 GyromaxTM Shaking Incubator, 9 x 17.5 Inches, (W x D), 40 Tube Capacity, Each
AMESK767-CSR-88 Custom Spring Rack Platform for AMESK767 GyromaxTM Shaking Incubator, 16 x 18.75 Inches, (W x D), 88 Tube Capacity, Each
AMESK777-CSR-48 Custom Spring Rack Platform for AMESK777 GyromaxTM Shaking Incubator, 9 x 21 Inches, (W x D), 48 Tube Capacity, Each
AMESK777-CSR-88 Custom Spring Rack Platform for AMESK777 GyromaxTM Shaking Incubator, 16 x 18.75 Inches, (W x D), 88 Tube Capacity, Each
AMESK727S Additional Shelf for AMESK727 GyromaxTM Shaking Incubator, Each
AMESK737S Additional Shelf for AMESK737 GyromaxTM Shaking Incubator Series, Each
AMESK747S Additional Shelf for AMESK747 GyromaxTM Shaking Incubator Series, Each
AMESKA-DWPH Plate Holder Accessory for Universal Platform, Holds up to 8 Plates or 4 Deep Well Plates, Each
AMESKA-TRH-S Tube Rack Accessory for Universal Platform, Holds 1 x Tube Rack (8 3/8 x 4 5/16 Inches, W x D), Each
AMESKA-TRH-T Tube Rack Accessory for Universal Platform, Holds 2 x Tube Rack (8 3/8 x 4 5/16 Inches, W x D), Each
AMESKA-TR-13-72 Tube Rack Accessory for Universal Platform, Holds 72 x (10-13 mm) Tubes, Each
AMESKA-TR-16-50 Tube Rack Accessory for Universal Platform, Holds 50 x 15 ml Conical Tubes (13  -16 mm) Tubes, Each
AMESKA-TR-20-32 Tube Rack Accessory for Universal Platform, Holds 32 x 15 ml Conical Tubes (16  - 20 mm) Tubes, Each
AMESKA-TR-25-18 Tube Rack Accessory for Universal Platform, Holds 18 (21  - 25 mm) Tubes, Each
AMESKA-TR-30-15 Tube Rack Accessory for Universal Platform, Holds 15 x 50 ml Conical Tubes (27  - 30 mm), Each
AMESKA-CC10 10 ml Flask Clamp for Universal Platform, Each
AMESKA-CC25 25 ml Flask Clamp for Universal Platform, Each
AMESKA-CC50 50 ml Flask Clamp for Universal Platform, Each
AMESKA-CC125 125 ml Flask Clamp for Universal Platform, Each
AMESKA-CC250 250 ml Flask Clamp for Universal Platform, Each
AMESKA-CC500 500 ml Flask Clamp for Universal Platform, Each
AMESKA-CC1000 1000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC2000 2000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC2800 2.8 L Fernbach Flask Clamp for Universal Platform, Each
AMESKA-CC4000 4000 ml Flask Clamp for Universal Platform, Each
AMESKA-CC6000 6000 ml Flask Clamp for Universal Platform, Each
AMESKA-SM Sticky Mat for Universal Platform, 18 x 18 Inches (W x D), Each
AMESKA-SK Stacking Kit for AMESK727, AMESK737 & AMESK747 GyromaxTM Shaking Incubator Series, Each
AMESKA-ROD Rods for 2-tier Platform, set of 4, Includes Mounting Hardware, 1 Kit required per platform, 1 Kit per pack

Specifications

Flask Size (ml)
Universal Platform Maximum Capacity
25 50 125 250 500 1000 2000 2800 4000 6000
AMESK727 64 36 25 16 9 5 4 2 2 0
AMESK737/737R 80 72 42 25 16 9 6 4 4 2
AMESK747/747R 144 112 63 42 30 15 12 6 6 4
AMESK767/767R 144 112 60 40 24 15 12 6 6 6
AMESK777/777R 198 160 104 70 40 24 15 8 8 8

Product Code AMESK727 AMESK737/737R AMESK747/747R AMESK767/767R AMESK777/777R
Temperature Range About 5° C above ambient to 80° C & Abot 4° to 80° C (for models with R designation)
Temperature Accuracy 0.1° C
Temperature Uniformity 0.2° C 0.3° C 0.5° C
Temperature Setting From a soft-touch membrane keypad
Temperature Control Auto-tune microprocessor PID controller
Temperature Display 0.1° C increments
Speed Range 20 to 40 rpm (60 Hz)
Display Type Digital LED
Orbit Size 0.75 inches/20 mm 1 inch/25 mm (larger orbits available)
Stackable Yes N/A
Shelves Included One N/A
Motor Maintenance-free, brushless motor
Heater 400 W 600 W 700 W 800 W
Refrigeration N/A N/A/0.25 hp N/A/0.33 hp
Chamber Construction Stainless Steel
Shaker Dimensions (W x D x H) 20 x 27.5 x 30 Inches, 51 x 70 x 77 cm 33 x 24 x(34/41) inches, 84 x 60 x (86/107) cm 39.5 x 28 x (33/40) inches, 100 x 71 x (83/101) cm 43 x 25 x 20 Inches, 109 x 63 x 93 cm 52 x 30 x 20 Inches, 131 x 76 x 93 cm
Platform Dimensions (W x D x H) 15 x 15 Inches, 38 x 38 cm 20.5 x 18 Inches, 52 x 45 cm 26 x 21 Inches, 66 x 53 cm 30 x 18 Inches, 78 x 46 cm 38 x 24 Inches, 96 x 60 cm
Shaker Weight 175 lb, 80 kg 250/270 lb, 113/123 kg 370/410 lb, 168/186 kg 385/425 lb, 175/193 kg 475/500 lb, 216/227 kg
Shipping Weight 250 lb, 113 kg 360/380 lb, 164/173 kg 520/565 lb, 236/2657 kg 550/595 lb, 250/270 kg 675/737 lb, 307/335 kg
Power 120 V, 50/60 Hz
Electrical Wattage 500 W 700/1200 W 900/1500 W
Warranty Product 24-month limited warranty, against manufacturers' defects. Refrigeration System: 12 month limited warranty, against manufacturer's defects
I Need a Quote
 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.
    Model   Descriptionascending   Qty   Select   Price 
 Incubator Shaker - 26cm H x 45cm W x 38cm D   AMESK-757   Incubator Shaker - 26cm H x 45cm W x 38cm D   1   Email for quote
diamed@diamed.ca
 
 Incubator Shaker - 44cm H x 38cm W x 38cm D   AMESK-727   Incubator Shaker - 44cm H x 38cm W x 38cm D   1   Email for quote
diamed@diamed.ca
 
 Incubator Shaker - 60cm H x 52cm W x 45cm D   AMESK-737   Incubator Shaker - 60cm H x 52cm W x 45cm D   1   Email for quote
diamed@diamed.ca
 
 Refrigerated Incubator Shaker - 60cm H x 52W x 45D   AMESK-737R   Refrigerated Incubator Shaker - 60cm H x 52W x 45D   1   Email for quote
diamed@diamed.ca
 
 Incubator Shaker - 60cm H x 66cm W x 53cm D   AMESK-747   Incubator Shaker - 60cm H x 66cm W x 53cm D   1   Email for quote
diamed@diamed.ca
 
 Refrigerated Incubator Shaker - 60cm H x 66W x 53D   AMESK-747R   Refrigerated Incubator Shaker - 60cm H x 66W x 53D   1   Email for quote
diamed@diamed.ca
 
 Incubator Shaker - 50cm H x 78cm W x 46cm D   AMESK-767   Incubator Shaker - 50cm H x 78cm W x 46cm D   1   Email for quote
diamed@diamed.ca
 
 Refrigerated Incubator Shaker - 50cm H x 78 W x 46 D   AMESK-767R   Refrigerated Incubator Shaker - 50cm H x 78 W x 46 D   1   Email for quote
diamed@diamed.ca
 
 Incubator Shaker - 50cm H x 96cm W x 60cm D   AMESK-777   Incubator Shaker - 50cm H x 96cm W x 60cm D   1   Email for quote
diamed@diamed.ca
 
 Refridgerated Incubator Shaker - 50cm H x 96W x 60D   AMESK-777R   Refridgerated Incubator Shaker - 50cm H x 96W x 60D   1   Email for quote
diamed@diamed.ca
 
Displaying 1 to 10 (of 10 products) Result Pages:  1 
Reviews